![]() Note: All fully supported NI devices (see 'Fully Supported NI Devices' table above) currently include a USB to Lightning (or Mini USB to Lightning) cable. Below we specify which adapter cable is required for your specific device and iOS model. ![]() Note: These devices can only be used as audio interfaces on any iOS app capable of streaming audio (including TRAKTOR DJ) but not as controllers for the TRAKTOR DJ app.īelow is a list of all compatible NI class-compliant devices and their specifications regarding the use of a power supply.Īll NI devices require an iOS adapter cable in order to establish a connection with an iOS device.ĭepending on the iOS device generation you use and the NI device type you wish to connect to, different iOS adapter cables are required. Compatible NI DevicesĬompatible NI devices can only be used with iPad.Īn iOS adapter cable needs to be purchased separately for these devices (see 'iOS Device Requirements' below). If you do not have a (required) power supply for your device, you can purchase one here. †Note: the TRAKTOR KONTROL S2 MK3 and S3 require iOS 11.0 or later, compatible with iPad 5th generation or later, iPad Air 1st generation or later, iPad mini 2nd generation or later, and iPad Pro 1st generation or later. *Note: TRAKTOR AUDIO 2 MK2 is not compatible with 2018 models of iPad which has a USB-C type port. ![]() If you got here but do not have another TRAKTOR READY controller to configure, just hit the Back button and choose No in the HARDWARE CONTROLLER SETUP as described above to directly get to the DECK LAYOUT window without adding another TRAKTOR READY controller.Mini-USB to Lightning cable not included If you choose Yes, Setup Wizard will take you to the HARDWARE CONTROLLER SELECTION screen. Choose Yes only if you are using another TRAKTOR READY controller, and choose No if you are solely using one or more of the NI controllers listed in this article. ![]() This makes it possible to add another controller to your configuration which does not support automatic detection, including MASCHINE or other third-party TRAKTOR READY controllers. With the add-on controllers TRAKTOR KONTROL X1 / F1 however, the Setup Wizard will additionally enter the HARDWARE CONTROLLER SETUP window and ask you whether or not your are using an external controller. With our stand-alone controllers TRAKTOR KONTROL S8 / S5 / S2 / S4 / Z2, you will directly get to the DECK LAYOUT screen to conclude the configuration. If you own one of the controllers named above, this is the only configuration step needed to add them to your TRAKTOR configuration. The WELCOME screen advises you to connect all your devices and USB controllers. When starting TRAKTOR for the first time, the Setup Wizard will come up and guide you through the configuration process. Note: Depending on the model and your TRAKTOR configuration, you may have to activate features like Remix Decks or Scratch Control in order to make full use of your controller. All necessary settings will be loaded as soon as TRAKTOR recognizes the device. If you are adding one of these controllers to your existing TRAKTOR installation, just install the drivers and plug it into a free USB port on your computer. ![]() TRAKTOR PRO 2 / 3 automatically detects all Native Instruments controllers based on our NHL protocol and adds them to your configuration. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |